Blinking Smart Stop

Kahtec Technologies International - Safety and Innovation

The National Highway Traffic Safety Administration (NHTSA) reports that rear impact collisions result in more injuries and property damage than any other type of automobile accident.

In recent years over 2.5 million rear-end collisions a year occurred, causing more than 2,149 deaths in one year. NHSTA stated in 2001 that an extra second of warning time could prevent 90% of all rear collisions, averting 2.25 million rear end crashes. Center High Mounted Stop Lights have displayed long-term effectiveness in reducing rear impact crashes by 4.3 percent in passenger cars and lightweight trucks. Using the Blinking Smart Stop Flashing Third Brake Light module will increase that percentage even more.

When you touch your brakes, the Blinking Smart Stop will cause your third brake light to flash quickly approximately 5 times before remaining solid. This will help get the attention of the drivers following behind you.

Standard Version

Delay Version

Blinking Smart Stop Plus

Plus Version

Both the Blinking Smart Stop Standard and "Delay" versions of the Brake Light Flasher lets you maximize your Brake Light Effectiveness. This compact State-of-the-Art solid-state electronic module converts your ordinary center brake light into an attention getting visual aid alerting device when you are braking. With the Blinking Smart Stop installed, when you apply your brakes, it causes your center high mounted third brake light to automatically emit a visual alerting signal by flashing the light approximately 6 times before entering the steady-state on red light condition.

This sequence has been selected because of its ability to gain and retain a following driver's attention.

The Delay Version was designed for those drivers who might not want to continuously flash their third brake light when caught in bumper to bumper traffic. Once you have applied your brakes for the first time causing your third brake light to flash and then turn solid, touching your brakes again within 8 seconds will cause your third brake light to turn on normally without flashing. In other words, you must have your foot off the brakes for more than 8 seconds before the Blinking Smart Stop will reset and cause your third brake light to flash again.

Blinking Smart Stop Plus Lets you maximize your Brake Light effectiveness when you apply your brakes. The Plus version was designed with a second output and is intended to connect directly to the Main "Left" and "Right" brake lights, to automatically emit a visual alerting signal of 5 light flashes before entering into a steady Brake Light ON condition. Works with all vehicles with separate brake light connections.

Simply follow the wiring instructions supplied with your Blinking Smart Stop or you can click here to view the Installation instructions.

Emergency vehicles use flashing lights at all times because it gets attention from other road users. So why not use the Blinking Smart Stop to grab the attention of following drivers, and reduce your risk of being hit in a rear-end collision?

Key Benefits

A great aid from the elements, when a following driver's vision is impaired by fog, rain, snow, or darkness.
Saves money by preventing potential rear end collisions resulting in lower insurance claims, which leads to lower premiums.
These modules are designed to enhance an automobiles brake lights.

Key Features

Standard & Delay versions will work with any third brake lights including LED bars.
Plus version will work with all vehicles that have separate rear brake and indicator lights.
Blinking Smart Stop only works when the driver applies the brakes.
A very simple Do-It-Yourself Installation.

Pulsating Brake Light Device Easy to Install

Specifications

Operating Voltage: 12 Volts DC
Size: 1" x 2" x 0.75" (26mm x 51mm x 19mm) Std and Delay Version
Size: 2" x 2" x 0.75" (51mm x 51mm x 19mm) Plus Version
Wire Lengths: 12" (0.32m) An additional 72" (1.9m) wire on Plus Version
Operating Temp: -30ºC to +70ºC
Max Power Consumption: 1W

What Your Order Includes

A 100% operationally tested Blinking Smart Stop Brake Light Module.
Three Quick Splice Connectors
Complete Installation Instructions
Quick delivery within 3-5 days
Emailed receipt and customer support
15 Day Risk Free Money Back Warranty

For auto safety accessories, Lighting and other Laws vary from state to state and country to country. Kahtec Technologies makes no representation or warranty to the legality of its products for street use on any vehicle or in any location.

Desgin By Webs From Us

DHTML Web Menu by OpenCube